DTF PRRESSING INSTRUCTIONS

DTF PRESSING INSTRUCTIONS

šŸ”„ Press Settings

Temperature: 300ā€“320Ā°F (149ā€“160Ā°C)
Pressure: Medium to firm (40ā€“60 psi)
Time: 15 seconds

šŸ‘• Pressing Steps

  1. Pre-press the garment for 5 seconds to remove moisture and wrinkles.

  2. Position your transfer (design facing up, film on top) on the garment.

  3. Press for 15 seconds at 300ā€“320Ā°F with medium-firm pressure.

  4. Cool Peel: Let the film cool completely before peeling off.

    • Start peeling slowly from a corner.

  5. Re-press the garment for 5ā€“10 seconds with a Teflon sheet or parchment paper on top for a smooth finish and better durability.

šŸ’§ Aftercare Tips

  • Wait 24 hours before washing.

  • Wash inside out, cold water, gentle cycle.

  • Hang dry or tumble on low heat.

  • Do not bleach or iron directly on design.